your current page:home|productsproducts
name:pvc series pipe making injection moulding machine
model:she400-pvc
- parameters
- characteristic
- introduction
| model | she400-pvc | ||
| injection unit | a | b | |
| screw diameter | mm | 73 | 75 |
| shot size(ps) | cm³ | 1590 | 1680 |
| shot weight | g | 1800 | 1900 |
| injection pressure | mpa | 160 | 152 |
| injection rate | g/s | 358 | 378 |
| screw l/d ratio | l/d | 21.2 | 20.6 |
| screw speed | r.p.m | 0-180 | |
| nozzle diameter | srmm | 20 | |
| clamping unit | |||
| clamping tonnage | kn | 4000 | |
| toggle stroke | mm | 700 | |
| mould thickness | mm | 280-710 | |
| space between tie-bar | mm | 720x720 | |
| ejector stroke | mm | 160 | |
| ejector tonnage | kn | 85 | |
| ejector number | piece | 13 | |
| hole diameter | mm | 160 | |
| others | |||
| heater power | kw | 20.5 | |
| max. pump pressure | mpa | 16 | |
| pump motor power | kw | 37 | |
| valve diameter | mm | 25 | |
| machine dimension | m | 7.3x2.3x2.4 | |
| machine weight | t | 13.8 | |
| oil tank capacity | l | 450 | |
● specially designed chromium plated screw& barrel is suitable for pvc, upvc. cpvc. powder pvc. with which can stabilize pvc material temperature, stable injection molding and create high plasticizing rate.
● high-torsion/low- rotation hydraulic motor increases effi cient plasticized capacity, reduces cooling time and lowers material consumption.
● specially designed widened safety door especially for the pvc moulds with big oil cylinder, easy for mold installation and more safety for the operator.
● two groups of core-pulling, two in and two out of each group.
● equipped with fans and wind cover, ensure minimum material temperature deviation.
● multiple groups of core-pulling and stainless steel screw are for option.
|
high-efficiency, energy-saving, environmental,low-noise, quick response pressure responses fast, quickly starts up to 0.05s. compared to traditional injection molding machine the control system to respond will be 2-3 times faster. high response speed, shorten cycle times, improve production effi ciency. products repeat accuracy can be increased to more than 5 thousandths, fully able to meet the requirements of ultra-precision injection molding.
|
|
comparison of power consumption
|
