your current page:home|productsproducts
name:h series nylon cable injection moulding machine
model:she360-h
- parameters
- characteristic
- introduction
| model | she360-h | ||
| injection unit | a | b | |
| screw diameter | mm | 65 | 70 |
| shot size(ps) | cm³ | 990 | 1150 |
| shot weight | g | 900 | 1046 |
| injection pressure | mpa | 163 | 141 |
| injection rate | g/s | 147 | 147 |
| screw l/d ratio | l/d | 19.4 | 22 |
| screw speed | r.p.m | 0-200 | |
| nozzle diameter | srmm | 20 | |
| clamping unit | |||
| clamping tonnage | kn | 3600 | |
| toggle stroke | mm | 520 | |
| mould thickness | mm | 210-550 | |
| space between tie-bar | mm | 670x670 | |
| ejector stroke | mm | 140 | |
| ejector tonnage | kn | 85 | |
| ejector number | piece | 13 | |
| hole diameter | mm | 110 | |
| others | |||
| heater power | kw | 16.5 | |
| max. pump pressure | mpa | 16 | |
| pump motor power | kw | 37 37 | |
| machine dimension | m | 7.2x1.9x2.1 | |
| machine weight | t | 14.5 | |
| oil tank capacity | l | 500 | |
●optimized toggle clamping design for the nylon cable mould, reduced opening stroke to shorten mould opening & clamping time.
●strengthened mould platen, frame, toggle, etc., make the whole machine more rigid and more durable with high clamping force.
●strengthened mould platen, frame, toggle, etc., make the whole machine more rigid and more durable with high clamping force.
●moog servo valve and upgraded hydraulic system ensures high injection speed and lower the production cycle.
|
high-efficiency, energy-saving, environmental,low-noise, quick response pressure responses fast, quickly starts up to 0.05s. compared to traditional injection molding machine the control system to respond will be 2-3 times faster. high response speed, shorten cycle times, improve production effi ciency. products repeat accuracy can be increased to more than 5 thousandths, fully able to meet the requirements of ultra-precision injection molding.
|
|
comparison of power consumption
|
