your current page:home|productsproducts
name:tl-vacuum autoloader
model:tl-300gn
- parameters
- characteristic
- introduction
| model | tl-300gn | ||
| motor |
type |
carbon brush | |
|
specification |
1.1kw 1ø | ||
| conveying capacity（kg/hr） | 400 | ||
| static wind pressure(max) | 1500 mmaq | ||
| filter | ø185×90h | ||
| volume of material hopper（l） | 6 | ||
| inside diameter of conveying pipe（mm） | ø38 | ||
|
external size（mm） |
main body l w h | 480×310×430 | |
| material hopper l w h | 430×440×295 | ||
| weight（kg） | main body | 20 | |
| material hopper | 6 | ||
• the main engine and the material hopper are designed separately,and thus it is safe,easy and convenient to be opperated.
• the whole operation is controlled by microtrip computer.
• equipped with an independent filter,which is very convenient to clean up dust.
• the equipped muffler reduces the noise in operation.
• stainless steel material hopper is light in weight,durable and very convenient for cleaning the device.
• the control box,being designed separately,is easy to be well maintained.
• auto-buzzer will give alarm while lacking material.
• auto-protective device protects motor against overloading.
• the bunker with electronic eye can be installed on the charging inlet of molding machine directly.
• the air revolving dust arrester reduce the clean times of filter is suitable for the grinded material conveying.
• can select two-material proportional valve ,used for new material mixed grinded material using or instant receiving of grinded material.