your current page:home|productsproducts
name:oil cooling type
model:cm-6/12-o
- parameters
- characteristic
- introduction
| model | temperature | heat capacity |
pump power |
pump volume |
pump pressure | mold conneting | external size | weight |
| ℃ | kw | kw | l/min | m | ″ | l×w×h (mm) | kg | |
| cm-6-o |
oil 170℃ （200℃） |
6 | 0.37 | 40 | 30 | 3/8"2×2 | 580×350×780 | 75 |
| cm-9-o | 9 | 0.75 | 135 | 25 | 3/8"4×2 | 680×350×780 | 100 | |
| cm-12-o | 12 | 0.75 | 135 | 25 | 3/8"4×2 | 680×350×780 | 125 |
• hot medium liquid : oil convertibly
oil can be used as a hot medium liquid according to the needs of mold forming temperature.its high selectivity is certain to bring in high economic efficiency.
• vertical pump
the flow of vertical pump can be always kept steady and its service life keeps long.
• stainless medium tank
this interior tank will not get rust for long term,which is sure to prevent from any blockade of pipes and keep long-term service of pump.
• transparent oil level viewer
the transparent oil level viewer can easily be used to view and inspect the quantity of medium liquid and be reminded to refill the medium liquid from time to time.
• automatic alarming device
while water oil shortage occurs in the container,this device will automatically light up and start alarming and cut off the electric power of heaters and pumps,thue to guarantee their safety.
• high-precision automatic temperature control
the measure of temperature is very sensitive and accurate,little change of temperature helps to keep products both fine and delicate.
• minimze products wastage
the mold can reach the required temperature righe at the beginning of operation,thus can obviously minimize products shortage.
• maintain proper temperature
either in continuous operation or in temporary shutting down,mold-forming temperature can always be kept proper to guarantee the best quality of products and further improve the forming process.
• compact in size,light in weight
easy to install,convenient to operate,convenient to move and little room to occupy.
automatic mold temperature control
unstale temperature in the process of mold dorming always tends to produce unqualified products.according to the principle of heat exchange,cm mold temperature controls make use of high property heattransferring oil as a medium to keep a properstable temperature in the process of mold forming so as to guarantee high quality of products and raise the priductive efficiency.